RF Settings
Follow the Settings and RF tabs. On this page, the user can configure the RF settings of the device.
LoRaWAN Settings
| Parameter | Description | Values |
|---|---|---|
| Device EUI | Device EUI. | Max. 16 characters |
| Application EUI | Application EUI. | Max. 16 characters |
| Application Key | Application key. | Max. 32 characters |
| Device Address | Device address. | Max. 8 characters |
| Application Session Key | Application session key. | Max. 32 characters |
| Network Session Key | Network session key. | Max. 32 characters |
| Confirm Mode | Configuration of the uplink payload as confirmed or unconfirmed. | Enabled / Disabled Default: Disabled |
| Network Join Mode | Network join mode. | ABP / OTAA Default: ABP |
| Confirm Packet Retransmission | Number of retransmissions for confirmed packet data. | 0–7 Default: 0 |
| Adaptive Rate | Adaptive data rate. | Enabled / Disabled Default: Enabled |
| Class | LoRaWAN class. | Class A / Class B / Class C Default: Class A |
| Duty Cycle | ETSI duty cycle setting. | Enabled / Disabled Default: Disabled |
| Data Rate | Data rate. | 0–7 Default: 0 |
| Join Delay on RX Window 1 | Join delay for RX window 1 (seconds). | 1–14 Default: 5 |
| Join Delay on RX Window 2 | Join delay for RX window 2 (seconds). | 2–15 Default: 6 |
| Public Network Mode | Public network mode. | Enabled / Disabled Default: Enabled |
| Delay of Received Window 1 | Delay of received window 1 (seconds). | 1–15 Default: 5 |
| Delay of Received Window 2 | Delay of received window 2 (seconds). | 2–15 Default: 2 |
| Data Rate of Received Window 2 | Data rate for received window 2. | 0–13 Default: 0 |
| Transmit Power | Transmit power. | 0 / 2 / 4 / 6 / 8 / 10 / 12 / 14 / 16 dBm Default: 16 dBm |
| Network Link Status | Network link status. | Linkcheck Disabled / Linkcheck Once / Linkcheck Everytime |
| Unicast Ping Slot Periodicity | Unicast ping slot periodicity. | 0–7 Default: 0 |
LoRa P2P Settings
| Parameter | Description | Values |
|---|---|---|
| Frequency | Frequency (Hz). | 863000000–870000000 Default: 868000000 |
| Spreading Factor | Spreading factor. | SF5 / SF6 / SF7 / SF8 / SF9 / SF10 / SF11 / SF12 Default: SF7 |
| LoRa P2P Bandwidth | LoRa P2P bandwidth. | 125 kHz / 250 kHz / 500 kHz / 7.8 kHz / 10.4 kHz / 15.63 kHz / 20.83 kHz / 31.25 kHz / 41.67 kHz / 62.5 kHz Default: 125 kHz |
| Code Rate | Code rate. | 4-5 / 4-6 / 4-7 / 4-8 Default: 4-5 |
| Preamble Length | Preamble length. | 5–65535 Default: 8 |
| TX Power | Transmit power (dBm). | 5–22 Default: 14 |
| Channel Activity Detection | Channel activity detection. | Enabled / Disabled Default: Disabled |
| IQ Inversion | IQ inversion. | Enabled / Disabled Default: Disabled |
| Sync Word | Synchronization word. | Max. 4 characters Default: 1424 |
| Symbol Timeout | Symbol timeout. | 0–248 Default: 0 |
| Fix Length Payload | Fixed length payload. | Enabled / Disabled Default: Disabled |
| RF Device ID | The RF device ID of the device. Must be unique for all devices in the network. | 1–254 Default: 1 |
| Encryption | Data encryption. | No Encryption / AES 256 |
| RF TX Timeout | Transmit timeout duration (milliseconds). | Default: 5000 |
| RF RX Timeout | Receive timeout duration (milliseconds). | Default: 5000 |
| RF Watchdog Timer Mode | RF watchdog timer mode. Triggered when RF communication does not occur for the specified duration. | Enabled / Disabled |
| RF Watchdog Timer Value | RF watchdog timer value (seconds). | Default: 120 |
| Modules to Restart | Modules to be restarted when the watchdog timer is triggered. Multiple selections can be made. | RF Reboot Device |