Physical and Environmental Specifications
Physical Specifications
| Physical Characteristics | |
|---|---|
| Ingress Protection | IP30 |
| Housing Material | Aluminum |
| Dimensions | 104 mm x 102 mm x 28 mm |
| Mounting | DIN Rail, Wall mounting |
| EMC | Static IEC61000-4-2, level 3 |
| Pulsed Electric Field IEC61000-4-4, level 3 | |
| Surge IEC61000-4-5, level 3 | |
| Physical Interface | |
|---|---|
| DC Barrel Jack | 9 V – 36 V standard 5.5 x 2.1 mm round socket |
| DC Terminal Block | 9 V – 36 V terminal block 2x5.08 mm |
| WAN/LAN | 1x 10/100M, MDI, MDIX, 1.5kV electromagnetic isolated protected |
| LAN | 2x 10/100M, MDI, MDIX, 1.5kV electromagnetic isolated protected |
| LED Indicators | Power, Wi-Fi, 2G/3G/4G, Signal Strength |
| SIM Card | 3 V/1.8 V SIM Card |
| Reset Button | 5 Seconds: Reset the device |
| Wi-Fi | 2x RP-SMA-K |
| Cellular | 1x SMA-K |
| Grounding Screw | It is recommended to connect the grounding wire to the grounding screw located on the product |
Grounding screw installation:
- Remove the grounding screw and place the grounding ring of the grounding wire onto the grounding screw,
- Tighten the grounding screw,
- Connect the grounding wire.
| LED Indicators | |
|---|---|
| PWR | Will light up if power is supplied (red). |
| WLAN | The WLAN indicator will be on during normal operation (green). |
| 2G | The 2G indicator will be on when connected to the 2G network. |
| 3G | The 3G indicator will be on when connected to the 3G network. |
| 4G | The 2G and 3G indicators will be on simultaneously when connected to the 4G network. |
| Signal Strength | 1 Light: Low Signal 2 Lights: High Signal |
Environmental Specifications
| Environmental Characteristics | ||
|---|---|---|
| Temperature | Operating Temperature | -20 ºC – +70 ºC |
| Storage Temperature | -40 ºC – +125 ºC | |
| Humidity | Operating Humidity | 5% – 95% |
| Storage Humidity | 1% – 95% | |